Drone Autopilots & GPS
Autopilots, GPS and RTK for ArduPilot and PX4
An autopilot is the flight controller of a professional or industrial drone: it runs ArduPilot or PX4, flies missions on its own, and holds position with GPS. The CubePilot Cube family plugs into a carrier board that brings out the ports, which lets you swap the core without rewiring the drone. Pick the core by redundancy and processor, and the carrier board by the ports and size you need.
GPS is what turns a drone into a mission platform. Here3 and Here4 are CAN GPS units with a compass, and RTK (a base station plus a rover GPS) brings positioning down to centimetres, for surveying and precise landing. Add a power module or power brick to feed the autopilot clean power and report battery voltage and current.
Buying guides: How to Choose a Pixhawk Autopilot: Cube, Carrier and Power · Drone GPS and RTK Guide: GNSS, Dual-Band, Compass and CAN






























