Aerium Pulse 14S Power Module for Pixhawk
A compact Aerium power module for Pixhawk-based autopilots. It handles 3S–14S LiPo (8–60V), provides a regulated 5V/3A supply for the autopilot and peripherals, and senses battery voltage and current in analog form so the autopilot can monitor consumption and trigger a battery failsafe. The power path is rated up to 60A, and current capacity can be raised with extra solder on a dedicated pour. Battery and ESC wiring goes to screw terminals or solder pads, whichever suits the build. The autopilot connection is a 6-pin JST-GH socket with the standard Pixhawk pinout; autopilots with a different power connector need a suitable cable. In ArduPilot set BATT_VOLT_MULT=31.0 and BATT_AMP_PERVLT=33.33. Size 26 × 23 mm, about 19 g.
Features
- 3S–14S LiPo (8–60V)
- Regulated 5V/3A for autopilot and peripherals
- Analog voltage and current sensing
- Up to 60A
- Screw terminals or solder pads
- 26 × 23 mm, about 19 g




