APM / Pixhawk Power Module, up to 6S, with 3A UBEC
A classic analog power module for APM and Pixhawk autopilots. It powers the autopilot from a 5.3V switching regulator (UBEC) rated up to 3A and measures battery voltage and current, so you get low-battery warnings and can trigger Return-to-Launch on voltage or consumed capacity. Maximum input is 25V (up to 6S LiPo), and current sensing reaches 90A on APM; on Pixhawk boards up to 60A can be measured, because the outputs are scaled for a 5V ADC. The 6-pin DF13 cable plugs straight into the APM 2.5/2.6 'PM' port and Pixhawk 1-style POWER ports. In ArduPilot set BATT_MONITOR=4 and calibrate BATT_VOLT_MULT and BATT_AMP_PERVLT against a multimeter. ArduPilot notes that shunt-type modules cannot carry their maximum rating continuously, so plan for a continuous load well below 90A.
Features
- Up to 25V input (6S LiPo)
- 5.3V UBEC, up to 3A, for the autopilot
- Current sensing up to 90A (60A on Pixhawk)
- Voltage and current sensing for alerts and RTL
- 6-pin DF13 cable for APM / Pixhawk 1




