CubePilot Here3+ RTK GNSS (M8P) with iStand
The Here3+ is a CubePilot DroneCAN GNSS module designed around the Cube series. Its u-blox M8P-2 receiver supports RTK: about 2.5 m in standard mode, and about 2.5 cm with a base station (not included) and a correction link. Compared with the Here3, the Here3+ moves to a faster STM32H757 processor, runs DroneCAN at 8 Mbit/s and carries an ICM42688 IMU and RM3100 compass. It has improved status LEDs and better dust and splash resistance, but it is not waterproof. The included iStand raises the GPS above the frame, away from interference from power wiring and ESCs. ArduPilot setup: connect to CAN1 or CAN2 and set CAN_P1_DRIVER=1, CAN_D1_PROTOCOL=1 and GPS_TYPE=9. There is no safety switch on the module – set BRD_SAFETYENABLE=0 or fit an external switch.
Features
- u-blox M8P-2 receiver with RTK support (base station required)
- 2.5 m standard, 0.025 m RTK accuracy
- STM32H757 processor, DroneCAN at 8 Mbit/s
- Built-in ICM42688 IMU and RM3100 compass
- Improved dust and splash resistance (not waterproof)
- Includes iStand GPS mast
Specifications
In the box
- 1× Here3+
- 1× iStand




