Mauch 074 HS-100-HV Hall Current Sensor, 100A, 4–14S
A Mauch current-measurement board built around an Allegro ACS-100U Hall sensor, measuring up to 100A continuous. A Hall sensor measures current without a shunt resistor, so it adds almost no heat or voltage drop. Battery-voltage sensing is optimized for up to 14S LiPo (HV series: 4–14S, 60V max). The board does not power itself: you need a matching Mauch BEC (sold separately), which also powers the autopilot, GPS and telemetry. Two 10 cm AWG12 red wires are attached, and a 10 cm 6-pin DF13 cable is included for Pixhawk 1 or APM; other autopilots need a suitable cable. In ArduPilot, enter the voltage-divider and A/V values from the unit's test report. Note the arrow on the sensor: it marks the current direction, and wiring it backwards gives wrong readings.
Features
- Allegro ACS-100U Hall sensor
- 100A continuous
- Voltage sensing up to 14S (4–14S, 60V max)
- Needs a Mauch BEC (sold separately)
- 10 cm AWG12 leads attached
- 6-pin DF13 cable for Pixhawk 1 / APM
Specifications
In the box
- 1 × HS-100-HV sensor board with 2 × 10 cm AWG12 leads
- 1 × 10 cm DF13 6-pin cable




