Aerium Kelvin Raspberry Pi CM5 Carrier Board
The Aerium Kelvin is a compact carrier board for the Raspberry Pi Compute Module 5, built to serve as a companion computer on drones, robots and autonomous vehicles – for vision processing, ROS, or a UART/MAVLink link to the flight controller. It takes battery power directly over an 8–60 V range, so most systems need no separate regulator. Interfaces include two MIPI-CSI camera inputs, two USB 3.0 ports, USB 2.0 and USB OTG, Ethernet, CAN, UART, I2C, SPI and an SD-card slot, all on locking JST-GH connectors. Revision B adds PCIe, RTC and fan connectors. Only eMMC versions of the CM5 are supported (partial CM4 compatibility). All I/O is 3.3 V logic – do not connect 5 V signals directly. The bare board weighs about 14 g; the CM5 module and heatsink are not included.
Features
- Wide 8–60 V input straight from the flight battery
- Two MIPI-CSI camera inputs
- Two USB 3.0 ports plus USB 2.0 / OTG
- Ethernet, CAN, UART, I2C and SPI on JST-GH connectors
- Rev B adds PCIe, RTC and fan connectors
- Bare board weight about 14 g




