CubePilot Mini Carrier Board for The Cube
The CubePilot Mini Carrier Board is a smaller version of the standard carrier, using the 80-pin DF17 connector that fits every Cube model (Orange, Orange+, Blue, Purple and others). It measures 47.5 × 38.5 × 17.8 mm in an ABS housing. Ports: GPS1 (8-pin), GPS2, TELEM1, TELEM2, I2C, CAN2, two power inputs POWER1/POWER2 on Molex CLIK-Mate connectors, buzzer, Spektrum input, and 8 main PWM outputs with RC input. The power inputs take 4–5.7 V (2.5 A) from a power brick, with automatic switch-over to the second input if the first fails, per-connector current limiting and over/under-voltage protection. The servo rail accepts 4–10.5 V. RC input defaults to PPM/SBUS; Spektrum needs a solder-pad change. The board is not waterproof. The Cube itself is not included.
Features
- 80-pin DF17 connector – fits every Cube model
- 47.5 × 38.5 × 17.8 mm
- Dual power inputs with automatic switch-over
- Per-connector current limiting and over/under-voltage protection
- GPS1/GPS2, TELEM1/TELEM2, I2C and CAN2
- 8 PWM outputs and RC input (PPM/SBUS)
Specifications
In the box
- 1× Mini Carrier Board for The Cube




