CubePilot RTK Combo: Here3+ GNSS + Here+ RTK Base (M8P)
A complete CubePilot RTK kit: a Here3+ receiver for the aircraft and a Here+ Base for the ground (two separate products in one package). The Here3+ connects to the autopilot over DroneCAN at 8 Mbit/s, with a u-blox M8P-2 receiver, STM32H757 processor, ICM42688 IMU and RM3100 compass; standard accuracy is about 2.5 m and RTK about 2.5 cm. The base uses a u-blox NEO-M8P-2 with a ceramic antenna and an SMA connector for an external antenna, and connects by USB to a computer running Mission Planner. There you run a survey-in, and corrections are sent to the aircraft through a pair of telemetry radios, which are not included. For mapping, agriculture and precision landing. In ArduPilot, set CAN_P1_DRIVER=1, CAN_D1_PROTOCOL=1 and GPS_TYPE=9 for the Here3+.
Features
- Here3+ receiver (M8P-2) with 8 Mbit/s DroneCAN
- Here+ Base station (NEO-M8P-2) with USB
- RTK accuracy around 2.5 cm
- Base setup in Mission Planner (survey-in)
- SMA connector for an external base antenna
- Telemetry radios for corrections sold separately
Specifications
In the box
- 1× Here3+ (HX4-06213)
- 1× Here+ RTK Base (M8P) (HX4-06019)




