Adafruit BMP280 Barometric Pressure & Altitude Sensor (I2C/SPI, STEMMA QT)
An Adafruit breakout for the Bosch BMP280 barometric pressure and temperature sensor, the successor to the BMP085/BMP180/BMP183. Absolute accuracy is ±1 hPa for pressure and ±1.0°C for temperature; as an altimeter it is good to about ±1 m, with low altitude noise of 0.25 m. It works over I2C or SPI and has an on-board regulator and level shifting, so it runs on 3.3V or 5V systems. STEMMA QT (Qwiic-compatible) connectors on both sides allow solder-free hookup; the QT cable is not included. For drones: ArduPilot supports an external BMP280 over I2C; connect it to the autopilot's I2C port, set BARO_PROBE_EXT=2 and reboot. Also suits Arduino and Raspberry Pi projects. Size 19.2 × 17.9 × 2.9 mm, weight 1.3 g.
Features
- Bosch BMP280 pressure and temperature sensor
- ±1 hPa accuracy, about ±1 m altitude
- I2C or SPI
- Works with 3.3V and 5V systems
- STEMMA QT / Qwiic connectors
- Supported as an external barometer in ArduPilot
- Only 1.3 g




