CubePilot Here Flow Optical Flow Sensor with LiDAR and IMU (CAN)
A finger-sized CubePilot optical flow sensor that combines a flow camera, an ST FlightSense ToF range finder (LiDAR) and an ICM20602 IMU. It connects over CAN, so it can sit at any node on the CAN bus without noise issues. Use it for GPS-free position hold at low altitude, indoor flight and precision-landing assistance. In ArduPilot, enable CAN (CAN_P1_DRIVER=1) and set RNGFND_TYPE=24 and FLOW_TYPE=6. CubePilot notes that the built-in range finder is useful for landing detection but is not suitable for height measurement outdoors above 0.5 m or indoors above 2 m; for full flow navigation they recommend a separate LiDAR. FLOWHOLD mode works without a range finder. Mount it under the aircraft with the camera facing the ground and the Y axis toward the nose; the sensor needs more than 60 lux of light.
Features
- Optical flow camera, LiDAR and IMU in one module
- CAN interface, 5V supply
- Flow range 80 mm to infinity
- LiDAR up to 2 m at up to 50 Hz
- 28.8 × 9.5 mm
- Supported in ArduPilot (FLOW_TYPE=6)




