Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / Autopilots & GPS / Pixhawk I2C Splitter Expansion Board (1-to-4)
Pixhawk I2C Splitter Expansion Board (1-to-4)

Pixhawk I2C Splitter Expansion Board (1-to-4)

₪12

A small expansion board that splits the autopilot's I2C port to four devices. Older Pixhawk and APM boards usually have a single I2C port, and when you need several devices on it, for example an external compass and an RGB LED module, an airspeed sensor or an external barometer, this board solves it. It has five parallel 4-pin, 1.25 mm-pitch sockets: one to the autopilot and four for peripherals. Because all sockets are wired in parallel, each device needs its own I2C address. Size 12 × 30 × 6 mm; an 80 mm 4-pin cable is included. ReadyEdi notes the red and black wire colours on the cable may be in the wrong order; this does not affect operation, but check the pin order (power and ground) before connecting. Autopilots with JST-GH ports may need a suitable cable.

Features

  • Splits one I2C port to four devices
  • 5 parallel 4-pin, 1.25 mm-pitch sockets
  • For external compass, RGB LED, airspeed sensor and more
  • 12 × 30 × 6 mm
  • Includes an 80 mm 4-pin cable

Specifications

Sockets5 × 4-pin, 1.25 mm pitch, all in parallel
Configuration1 input to 4 peripherals
Dimensions12 × 30 × 6 mm
Included cable4-pin, 80 mm
CompatibilityPixhawk / APM I2C port

In the box

  • 1 × Pixhawk I2C splitter board
  • 1 × 4-pin cable, 80 mm
1
Ships separately from another warehouse: ₪50 shipping, no self pickup.
SKUAPL-0034
BrandReadyEdi
CategoryAutopilots & GPS
Stock23 units
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved