CubePilot Here3 RTK GNSS (M8P) with iStand
The Here3 is a CubePilot DroneCAN GNSS module designed for the Cube series. Its u-blox M8P-2 receiver supports RTK: about 2.5 m in standard mode, and about 2.5 cm with a base station (not included) and a correction link. It has an STM32F302 processor running ChibiOS, an ICM20948 sensor (accelerometer, gyro and compass) and a status LED. The housing has better dust and splash resistance but is not waterproof. The included iStand raises the GPS above the airframe, away from power-wiring interference. ArduPilot setup: connect to CAN1 or CAN2, set CAN_P1_DRIVER=1, CAN_D1_PROTOCOL=1 and GPS_TYPE=9; the module has no safety switch, so set BRD_SAFETYENABLE=0 or add an external switch. For 8 Mbit/s DroneCAN, see the Here3+.
Features
- u-blox M8P-2 receiver with RTK support (base station required)
- 2.5 m standard, 0.025 m RTK accuracy
- DroneCAN connection to Cube autopilots
- STM32F302 processor, ICM20948 sensor with compass
- Improved dust and splash resistance (not waterproof)
- Includes iStand GPS mast
Specifications
In the box
- 1× Here3
- 1× iStand




