Pixhawk 2.4.8 32-bit Flight Controller (PX4FMU + PX4IO)
The Pixhawk 2.4.8 is a flight controller based on the open Pixhawk 1 design. The main processor is an STM32F427 (Cortex-M4 with FPU, 168 MHz, 256 KB RAM, 2 MB flash), with an STM32F103 failsafe co-processor. Sensors: MPU6000 (accelerometer/gyro), L3GD20 (gyro), LSM303D (accelerometer/compass) and an MS5611 barometer. Interfaces: five serial ports, two CAN, I2C, SPI, Spektrum DSM, S.Bus and PPM inputs, RSSI input and 14 PWM outputs, plus microSD flight logging, RGB LED and buzzer. Suited to multirotors, fixed-wing aircraft and rovers on ArduPilot. Note: boards with an early revision of the STM32F427 are limited to 1 MB of usable flash, in which case ArduPilot installs a reduced build; and some boards of this type use Molex PicoBlade rather than DF13 connectors – check cable compatibility.
Features
- STM32F427 at 168 MHz with STM32F103 failsafe co-processor
- MPU6000, L3GD20, LSM303D and MS5611 barometer
- 5 serial ports, 2 CAN, I2C and SPI
- DSM, S.Bus and PPM inputs
- 14 PWM outputs
- microSD flight logging
Specifications
In the box
- 1× Pixhawk 2.4.8 flight controller
- 1× Safety switch
- 1× Flight controller case
- 1× Buzzer
- 1× 6-pin to 6-pin cable
- 1× 4-pin to 4-pin cable
- 1× 3-pin DuPont cable




