CubePilot Cube Orange FD Standard Set with ADS-B Carrier Board
A CubePilot standard set pairing the Cube Orange FD (the Cube Orange with a CAN FD interface) with the ADS-B IN carrier board. The carrier integrates a uAvionix 1090 MHz ADS-B IN receiver with a built-in antenna on internal Serial 5: it picks up nearby aircraft transmitting ADS-B OUT and shows their position, altitude, speed and ID at the ground station. ArduPilot can also use it for alerts and avoidance (AVD_ENABLE). The Cube Orange runs an STM32H753 with 2 MB flash and 1 MB RAM, three IMUs – two vibration-isolated and heated – and two barometers. It provides 14 PWM outputs, five serial ports, two CAN and two I2C buses. To enable the receiver in ArduPilot set SERIAL5_BAUD=57 and SERIAL5_PROTOCOL=1. CubePilot states the product is NDAA compliant.
Features
- uAvionix 1090 MHz ADS-B IN receiver with built-in antenna
- Cube Orange STM32H753 with CAN FD
- Three IMUs, two isolated and heated
- 14 PWM outputs, 5 serial ports, 2 CAN
- Aircraft alert and avoidance in ArduPilot
- NDAA compliant per CubePilot
Specifications
In the box
- 1× Cube Orange FD
- 1× ADS-B IN carrier board




