H743 Flight Controller for ArduPilot and Betaflight (3–12S, 30.5 mm)
An STM32H743 (480 MHz) flight controller in the 30.5×30.5 mm format that runs either ArduPilot or Betaflight — for multirotors, fixed-wing and VTOL. It carries dual ICM42688 IMUs, an SPL06 barometer, an AT7456E OSD chip and 16MB of flash for logging. There are 8 UARTs, one CAN port and 13 PWM outputs (12 motor, 1 LED) for GPS, telemetry, receiver, gimbal and other sensors. It takes battery power directly at 7–54V (3S–12S) with dual eFuse and voltage sensing, and has three onboard regulators: 3.3V 0.5A, 5V 3A, and 12V 3A for video, which can be switched via GPIO. Two camera inputs with switching between them. Size 38×46 mm, weight 19 g. Before flashing, check with us which firmware target matches this board.
Features
- STM32H743 480 MHz, ArduPilot and Betaflight
- Dual ICM42688 IMUs, SPL06 barometer
- AT7456E OSD, 16MB flash
- 8 × UART, 1 × CAN, 13 × PWM
- 3S–12S input (7–54V)
- 5V 3A and switchable 12V 3A BECs, plus 3.3V
- 30.5 mm mounting, 19 g
Specifications
In the box
- 1 × Flight controller
- 1 × Cable kit




