Hobbywing XRotor F7 (F722) 8S Lite Flight Controller - ICM-42688
A Hobbywing XRotor Lite flight controller for 4S to 8S, on an STM32F722 with an ICM-42688 gyro. The board carries a Goertek barometer with a typical accuracy of ±0.3hPa. It sits on the underside, out of the prop wash. There is also an AT7456E OSD chip, Canvas-mode digital OSD support and a 16Mb blackbox. It has 6 UARTs, four motor outputs plus two more (ch5, ch6), LED and beeper control, and SmartAudio or Tramp for the VTX. A dual 5V 3A and 10V 3A BEC powers the receiver, GPS and VTX. The plug-and-play slots fit DJI, Walksnail and HDZero systems. It ships with Betaflight 4.5.2, and the target is HOBBYWING_XROTORF7CONV. It measures 35x35x7.7mm, mounts on 30.5x30.5mm and weighs 10g. Tips: it connects to XRotor 8S Lite ESCs over an 8-pin SH1.0 cable, so it pairs naturally with the XRotor 100A 8S Lite AT. A high-power VTX can be fed straight from the battery (BAT) rather than from the BEC. This is the original version: the V2 adds a gyro LDO and raises the second BEC to 12V.
Features
- STM32F722 MCU, ICM-42688 gyro
- 4S to 8S input
- 6 UARTs, 4+2 motor outputs
- Dual BEC: 5V 3A and 10V 3A
- Goertek precision barometer (±0.3hPa), underside-mounted away from airflow
- 16Mb blackbox, analog or Canvas-mode digital OSD
- Plug-and-play slots for DJI, Walksnail and HDZero, damping grommets fitted
Specifications
In the box
- Flight controller
- Damping grommets




