Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / Electronics / Aocoda-RC F722 V2 Flight Controller X8 ICM42688P 30.5mm
Aocoda-RC F722 V2 Flight Controller X8 ICM42688P 30.5mmOut of stock

Aocoda-RC F722 V2 Flight Controller X8 ICM42688P 30.5mm

₪230

The Aocoda-RC F722 V2 is a 30.5 x 30.5mm flight controller rated for 3S to 8S, so it covers freestyle builds as well as large 7S and 8S long-range quads without an extra regulator. It runs an STM32F722 (216MHz) with an ICM42688P gyro, SPL06-001 barometer, AT7456E analog OSD and 16MB blackbox. Five UARTs, ten PWM outputs (including the LED strip pad) and one I2C port for a compass let you connect a receiver, GPS, compass and digital video system at the same time. The BEC provides 5V and 9V at 2.5A; the 9V rail can feed a camera or video transmitter. There is no current sensor on the FC itself, it reads current from the ESC through the CURR pad. Betaflight, INAV and ArduPilot are all supported under the AOCODARCF722V2 target, which makes it a solid pick for GPS and autonomous builds.

Features

  • STM32F722 MCU at 216MHz
  • ICM42688P gyro, SPL06-001 barometer
  • 3S to 8S input
  • 5V and 9V BEC at 2.5A
  • 5 UARTs plus I2C for a compass
  • 16MB blackbox and analog OSD
  • Betaflight, INAV and ArduPilot

Specifications

MCUSTM32F722RET6, 216MHz, 512KB Flash
GyroICM42688P (SPI1)
BarometerSPL06-001 (I2C)
OSDAT7456E (SPI2)
Blackbox16MB (SPI3)
UARTs5 (1,2,3,4,5)
PWM Outputs10 (incl. LED strip pad)
I2C1
ADC3 (VBAT, RSSI, CURR)
SBUSbuilt-in inverter
USBType-C
Cameradual input with free switching
ReceiversELRS / CRSF / S.BUS / FrSky / Futaba / FlySky / TBS Crossfire / DSMX
DJI OSDsupported on any spare UART
Input Voltage12.6-33.6V (3-8S LiPo)
BEC5V/2.5A, 9V/2.5A (max 2.7A)
Current Sensornot built in
Static Power200mA@5V (Betaflight), 150mA@5V (ArduPilot)
Dimensions37 x 37mm
MountingM3 30.5 x 30.5mm
Weight9.4g
Firmware TargetAOCODARCF722V2 (Betaflight / INAV / ArduPilot)
In the Box1x F722 V2 FC, 2x 8PIN SH1.0 cable, 4x M3*8 shock-absorbing ball

In the box

  • 1x F722 V2 FC
  • 2x 8-pin SH1.0 cable
  • 4x M3x8 damping ball
How long will it fly? Open the flight time calculator →
1
SKUELC-0003
BrandAocoda-RC
CategoryElectronics
StockOut of stock
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved