BrotherHobby SE 3115 900KV Brushless Motor - 6S, 9 inch
BrotherHobby's SE 3115 motor in the 900KV version, a 6S motor for 9-inch propellers. It has a 31mm by 15mm stator in 0.2mm Nippon silicon steel, a 12N14P layout, N52H arc magnets, Japanese NMB 12x6x4 bearings, 7075 aluminium base and bell, and an SUS420 steel shaft with an M5 thread. The maker tested it on 6S with an HQ 9x5x3 prop and a 65A 6S ESC: about 3.8kg of thrust at 64.9A and 1597W at full throttle, and 1.3kg at only 13.2A at half throttle, an efficiency of 3.97g/W. The winding reached 81°C after two minutes at full throttle in 26°C air. It weighs 125.2g including 300mm 16AWG leads, and mounts with 4x M3 on a 19mm pattern. It suits 9-inch 6S builds that want strong thrust and smooth response, and a 60A or larger ESC is a good starting point. The test figures are the maker's own bench data, not a promise for your build.
Features
- 900KV for 6S, for 9-inch propellers
- 3.8kg thrust on 6S with HQ 9x5x3
- Half throttle: 1.3kg at 13.2A (3.97g/W)
- 31x15mm stator, 12N14P
- NMB bearings, N52H magnets, 7075 aluminium body
- 125.2g, 300mm 16AWG leads
- 4x M3 on a 19mm pattern
Specifications
In the box
- 1x 3115 motor
- 4x M3x8 screw
- 1x M5 flange nut




