Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / Motors / iFlight XING-E 4214 400KV Brushless Motor - up to 8S, 13-15 inch props
iFlight XING-E 4214 400KV Brushless Motor - up to 8S, 13-15 inch props

iFlight XING-E 4214 400KV Brushless Motor - up to 8S, 13-15 inch props

₪300

A 4214 motor from iFlight's XING-E series in the 400KV version, for large drones. iFlight lists it as the motor for its X413 frame kit. The specified input voltage is 32V, which is 8S; the layout is 12N14P, with curved N48SH magnets, a segmented bell and single-strand copper windings. In the maker's test table on 8S (about 31.6V) the motor produced up to 4299g of thrust at 38A and 1199W with an HQ 13x9x3 prop, and up to 4948g at 46.7A and 1471W with a Gemfan 1410. At half throttle with the HQ 13x9x3 it gives about 1.5kg of thrust at only 8A, an efficiency of 5.88g/W. On 6S (about 23.7V) with an HQ 15x7x3 the maximum thrust is 3437g at 28.9A. An ESC of 60A or more per motor suits 8S use with props like these. The table also includes tests at about 50V with 11 and 12 inch props. The HQ 12x7.5x3 test there shows 7123g of thrust at 65.5A and 3229W, but also a temperature of 150°C, so it is not an operating point for normal flight. The motor weighs 239g including the wires, measures 48.6 x 60.5mm including the shaft, has a 6mm shaft that protrudes 26.5mm, and mounts with 4x M4 screws on a 30x30mm pattern. The leads are 800mm 14AWG, long enough to reach an ESC in the centre of the frame without extensions. The test figures are the maker's own data, not a promise for your build. The price is for one motor; a quad needs four.

Features

  • 400KV, 32V (8S) input according to iFlight
  • Up to 4299g thrust on 8S with HQ 13x9x3 (maker's data)
  • Half throttle: about 1.5kg thrust at 8A
  • 239g with wires, 12N14P layout
  • 6mm shaft, 4x M4 on a 30x30mm pattern
  • 800mm 14AWG leads
  • Curved N48SH magnets, segmented bell

Specifications

ModeliFlight XING-E 4214
KV400
Input voltage32V (8S)
Configuration12N14P
Motor dimensionsØ48.6 x 60.5mm (with shaft)
Shaft6mm, protrudes 26.5mm
Mounting4x M4, 30 x 30mm
Weight239g (with wires)
Lead wire14AWG, 800mm
Interphase resistance83.4mΩ
Peak current65.54A
Max power3229W
MagnetsN48SH curved
RotorSegmented bell
WindingSingle-strand copper
BearingsØ12 x Ø6 x 4mm
Test: HQ 13x9x3, 31.6V, max4299g · 38.0A · 1199W · 3.59g/W
Test: HQ 13x9x3, 32.0V, 50%1511g · 8.0A · 257W · 5.88g/W
Test: Gemfan 1410, 31.5V, max4948g · 46.7A · 1471W · 3.36g/W
Test: HQ 15x7x3, 23.7V, max3437g · 28.9A · 685W · 5.02g/W
Test: HQ 11x4.5x3, 49.6V, max5028g · 32.6A · 1620W · 3.10g/W
Test: HQ 12x7.5x3, 49.3V, max7123g · 65.5A · 3229W · 2.21g/W (150°C)

In the box

  • 1 x iFlight XING-E 4214 400KV motor
  • 4 x M4x8 screws
  • 1 x M6 flange nut
How long will it fly? Open the flight time calculator →
1
SKUMOT-0014
BrandiFlight
CategoryMotors
Stock4 units
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved