BrotherHobby Tornado T5 3115 Pro Brushless Motor - 640KV
BrotherHobby's Tornado T5 3115 Pro at 640KV. It has a 31x15mm stator in 0.2mm Kawasaki silicon steel, a 12N14P layout, N52H arc magnets, NMB bearings and a hollow titanium shaft with an M5 thread. BrotherHobby rates the series for 5S to 8S. They tested the 640KV on 6S with a GF 11x7x3 prop: 3.7kg of thrust at 39A and 971W at full throttle, and about 1.7kg at only 11.9A at half throttle, which is 5.7g/W. That makes it a version for big props and efficient cruising, on 10-11 inch long-range and payload builds. It weighs 115.5g with 300mm 16AWG leads and mounts with 4x M3 on a 19mm pattern, which fits the Mark4 V2 10-inch frame. The test used a 6S 50A ESC, a good starting point when picking one.
Features
- 640KV, series rated 5S to 8S
- 3.7kg thrust on 6S with GF 11x7x3
- Half throttle: 1.7kg at 11.9A (5.7g/W)
- 31x15mm stator, 12N14P
- NMB bearings, N52H magnets, hollow titanium shaft
- 115.5g, 300mm 16AWG leads
- 4x M3 on a 19mm pattern
Specifications
In the box
- 1x 3115 motor
- 4x M3x8 screw
- 1x M5 flange nut




