Hobbywing XRotor 3115 900KV Brushless Motor - 6S, 9-10 inch FPV
The Hobbywing XRotor 3115 in its 900KV version, from Hobbywing's FPV line, for 9 and 10-inch quads on 4S to 6S - long range, cinematic and payload builds. On 6S (24V) with an HQ 10x5x3 prop Hobbywing rates it at a maximum of 5177g of thrust at 81A (1940W), but only in short bursts of about 9 seconds; the rated continuous output is 300W. In Hobbywing's test table, at 50% throttle on an HQ 9x4x3 prop it makes 937g at 7.4A, about 5.25g/W, and on a 10x5x3 it makes 1728g at 14.2A - numbers that suit efficient hovering on a heavier quad. Hobbywing states that its heavy-load efficiency is about 5% better than motors of the same specification from other brands, and that full-load running time is more than 50% longer, thanks to a self-cooling rotor structure. The prop seat is grooved so the propeller cannot slip on the shaft. Inside are 0.2mm silicon steel laminations, 220°C enamelled wire in a multi-strand winding that raises the slot fill, and arc-shaped N52 magnets for strong torque. The motor weighs 125g, measures Φ37.2x32mm, has a D5+M5 shaft 16mm long, and mounts with 4 x M3 on a Φ19mm pattern. Hobbywing recommends pairing it with the XRotor FPV G2 65A 4in1 ESC. Price is for one motor.
Features
- 900KV on 4S-6S, for 9-10 inch quads
- 5177g max thrust (HQ 10x5x3, 6S)
- About 5.25g/W at 50% throttle (HQ 9x4x3)
- Self-cooling rotor - per Hobbywing, 50%+ longer full-load running time
- Grooved anti-slip prop seat
- N52 magnets, 0.2mm silicon steel, 220°C wire
- 125g, D5+M5 shaft, 4xM3 on 19mm mount
Specifications
In the box
- 1 x Hobbywing XRotor 3115 900KV motor




