Mark4 V2 7 Inch FPV Frame - 295mm Wheelbase, 3K Carbon Fiber
₪220
A Mark4 V2 frame for 7-inch props, cut from 3K carbon fiber, with a 295mm motor-to-motor diagonal. 7 inches is a common long-range size: it flies longer than a 5-inch while staying light and easy to carry. Seller specs list 6mm arms, 3mm bottom and middle plates, a 2mm top plate and 2.5mm camera side plates. There is 35mm of interior height for electronics. The flight controller and video transmitter mount on 30.5x30.5 or 20x20mm patterns, and the camera is 19mm wide. Motor holes are 16mm and 19mm, and the seller recommends 2204 to 2307 motors with a 20-50A ESC. The frame ships unassembled, without motors, electronics or props.
Features
- Frame for 7-inch props
- 295mm motor-to-motor
- 3K carbon fiber
- 6mm arms
- 35mm interior height
- 30.5x30.5 or 20x20mm FC and VTX mounting
- 16mm and 19mm motor holes, 19mm camera
Specifications
Frame size7 inch props
VersionMark4 V2
Wheelbase (motor to motor)295mm
Material3K carbon fiber
Frame dimensions274 x 225 x 55mm
WeightAbout 185g (in bag)
Arm thickness6mm
Top plate2mm
Bottom and middle plates3mm
Camera side plates2.5mm
Interior height35mm
FC and VTX mounting30.5x30.5mm / 20x20mm
Motor mounting16mm / 19mm
Camera mount19mm
Recommended motors2204 to 2307
Recommended ESC20-50A
In the box
- Carbon top, middle and bottom plates
- 4 arms
- Camera side and connecting plates
- Battery strap
- Rubber pads and an anti-slip pad
- Screw and standoff set
1
SKUFRM-0006
BrandMark4
CategoryFrames
Stock15 units




