Mark4 V3 Pro 15" 3K Carbon Fiber Frame
The Mark4 frame in its V3 Pro version for 15-inch props, cut from 3K carbon fiber, for large long-range and payload builds. Seller specs give a 680mm motor-to-motor diagonal, 8mm arms tied together with braces, a 2mm top plate, a 3mm bottom plate and 2.5mm braces. The centre takes a 30.5x30.5 (M3) or 20x20 (M2) stack, there is a second mount at the rear for a video transmitter in the same patterns, and the front holds a 19mm micro camera between carbon side plates. The arm tips take motors on a 30mm M4 pattern - the same as the Flash Hobby A4320 sold in this store. It was laid out mainly for analog video, but a digital system fits too. A broken arm can be replaced on its own.
Features
- For 15-inch props, 680mm diagonal
- 3K carbon fiber
- 8mm arms joined by braces
- 30mm M4 motor holes
- 30.5x30.5 or 20x20 stack, separate VTX mount
- 19mm micro camera between carbon side plates
- Separate arms - a broken arm is replaced on its own
Specifications
In the box
- Mark4 V3 Pro 15-inch plates and arms
- Screws and standoffs




