Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / Frames / Mark4 V2 13 Inch Carbon Fiber FPV Frame
Mark4 V2 13 Inch Carbon Fiber FPV Frame
Fpv Base

Mark4 V2 13 Inch Carbon Fiber FPV Frame

₪250

A Mark4 V2 frame for 13-inch props, cut from 3K carbon fiber, for long-range and payload FPV builds. Seller specs put the motor-to-motor diagonal at about 536-539mm, with 8mm arms, a 2mm top plate and a 3mm bottom plate. Braces run between the arms to stiffen the long arms and cut down on vibration. The centre takes a 30.5x30.5 or 20x20mm stack and a 19mm micro camera. 4320 motors at 350KV, such as the Flash Hobby A4320, are often sold bundled with this frame. It ships unassembled, with battery straps, pads and a hardware set. Before ordering, check that your motor's bolt pattern matches the arm tips.

Features

  • 3K carbon fiber
  • For 13-inch props
  • 8mm arms with cross braces
  • About 536-539mm motor-to-motor
  • 30.5x30.5 or 20x20mm stack
  • 19mm micro camera mount
  • Battery straps and hardware included

Specifications

Size13 inch props
VersionMark4 V2
Wheelbase (motor to motor)536-539mm (varies by listing)
Material3K carbon fiber
Arm thickness8mm
Top plate2mm
Bottom plate3mm
Stack mounting30.5x30.5mm / 20x20mm
Camera mountMicro, 19mm
Sold as1 frame set (unassembled)

In the box

  • Carbon top, middle and bottom plates
  • 4 arms and 4 arm braces
  • Side plates and camera mount
  • 2 battery straps and rubber pads
  • M3 screws in several lengths and standoffs
How long will it fly? Open the flight time calculator →
1
SKUFRM-0003
BrandFpv Base
CategoryFrames
Stock2 units
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved