Mark4 V2 10" Kit
A Mark4 V2 frame kit for 10-inch props, X10C version, in carbon fiber. It is a middle size for long-range and cinematic flying, giving more air time than a 7-inch without going up to heavy-lift size. Seller specs for the Mark4 V2 10-inch give a 427mm motor-to-motor diagonal, 7.5mm arms joined by braces, a 2mm top plate and a 3mm bottom plate. The centre takes a 30.5x30.5 (M3) or 20x20 (M2) stack, there is a rear mount for a video transmitter, and the front holds a 19mm micro camera. Motor holes are 16mm and 19mm for M3 screws, so 28xx and 31xx motors such as the BrotherHobby Tornado T5 3115 fit. The photos show frame parts only: plates, arms, braces, a battery strap and hardware.
Features
- Mark4 V2 frame for 10-inch props
- 427mm motor-to-motor
- 7.5mm arms with braces
- 16mm and 19mm M3 motor holes
- 30.5x30.5 or 20x20 stack
- 19mm micro camera




