Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / FPV Gear / CubePilot Herelink V1.1 HD Video Transmission System (Controller + Air Unit)
CubePilot Herelink V1.1 HD Video Transmission System (Controller + Air Unit)

CubePilot Herelink V1.1 HD Video Transmission System (Controller + Air Unit)

₪7,612

The complete CubePilot Herelink V1.1 kit: ground controller with screen plus air unit. It combines an RC transmitter, a ground station and a digital link for HD video, telemetry and control, designed for Cube autopilots with ArduPilot or PX4. The controller has a 5.46" 1080P 1000-nit touchscreen with Solex TX and QGroundControl. The air unit takes video from two Micro-HDMI inputs, provides two S.Bus outputs (control and gimbal) and a 3.3V UART for telemetry; V1.1 adds an Ethernet port and an SD slot. According to CubePilot, Herelink operates in the 2.4 GHz ISM band, with a stated range of up to 20 km in FCC mode and 12 km in CE/SRRC/MIC modes, and 110 ms video latency. The air unit runs on 7–12V (3S supported), so it is usually fed from a BEC. Update both units to the latest firmware with flasher_win before use.

Features

  • Complete kit: ground controller + air unit
  • HD video, telemetry and control in one link
  • 5.46" 1080P 1000-nit touchscreen
  • 2.4 GHz ISM per maker; stated range up to 20 km (FCC)
  • Air unit: 2 × Micro-HDMI, 2 × S.Bus, UART, Ethernet
  • For Cube, ArduPilot and PX4

Specifications

Part numbersHX4-06211 (controller) + HX4-06210 (air unit)
Frequency band (maker)2.4 GHz ISM
Range (maker)Up to 20 km (FCC); 12 km (CE / SRRC / MIC)
Video latency (maker)110 ms
Video modes720p@30fps, 1080p@30/60fps
Signal bandwidth20 MHz / 10 MHz
Controller screen5.46", 1080P, capacitive touch, 1000 nit
Controller batteryBuilt-in 4950mAh LiPo
Controller weight536 g
Controller dimensions217 × 106.5 × 31 mm (excl. antennas and sticks)
Processor (both units)Pinecone S1 SoC, 8 cores
Air unit video inputs2 × Micro-HDMI
Air unit outputs2 × S.Bus (control, gimbal), 3.3V UART
Air unit V1.1 additionsEthernet port, SD card slot
Air unit input voltage7–12V (min 6V; 3S supported)
Air unit weight98 g (with antennas)
Air unit dimensions78.5 × 30 × 15 mm

In the box

  • Controller: 1 × Herelink Controller Unit, 2 × Joystick, 1 × Omni-directional Antenna, 1 × Directional Antenna, 1 × Set-up tips card
  • Air unit: 1 × Herelink Air Unit, 1 × Mounting Plate, 1 × Screw Set, 1 × Silicone Ring Set, 2 × Taoglas Antenna, 1 × Fan, 1 × Cable Set, 1 × HDMI Cable, 1 × Set-up tips card
How long will it fly? Open the flight time calculator →
1
Ships separately from another warehouse: ₪50 shipping, no self pickup.
SKUFPV-0035
BrandCubePilot
CategoryFPV Gear
Stock5 units
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved