Fiber Optic FPV Module - Ground Unit (RX, Pilot Side)
The ground end of the fiber-optic link, sitting with the pilot at the spool end. It receives the light coming from the drone through the fiber and turns it back into analog video (CVBS), which you can feed to a monitor, a DVR or a small 5.8GHz transmitter that sends it on to your goggles. Over the same fiber it sends the control commands up to the drone; these come in as a serial link (CRSF or SBUS) from your radio or its RF module. It works as a pair with the air unit (TX) and a fiber spool with an FC connector. Mount it close to the spool, where the fiber will not bend sharply or get pulled tight at take-off. Keep the dust cap on the optical connector whenever the fiber is unplugged, and clean the tip before mating if it has been exposed to dust.
Features
- Pilot side of the link, at the spool end
- Light from the fiber → analog video (CVBS) for a monitor, DVR or goggles VTX
- Commands from your radio (CRSF / SBUS) → light in the fiber, up to the drone
- One fiber carries both directions
- The link itself is immune to RF jamming
- FC optical connector with dust cap
- 4 corner mounting holes
Specifications
In the box
- 1 x ground module (RX)
This product is not sold through the cart. We go over your setup with you on the phone first, to make sure it fits, and take the order in that call.




