Fiber Optic FPV Module - Air Unit (TX, Drone Side)
The air end of the fiber-optic link, mounted on the drone. It takes the analog video (CVBS) from the FPV camera, turns it into light and sends it to the ground down the fiber. Over the same fiber it receives the control commands from the ground and passes them to the flight controller as a serial link (CRSF or SBUS). With no video radio on the drone, there is no video link to jam. It works as a pair with the ground unit (RX) and a fiber spool with an FC connector. Because the input is CVBS, it is for analog cameras only. To install: connect the camera's video output to the video input, connect the control output to a free UART on the flight controller, and set the receiver protocol in the FC to the one you use. Keep the dust cap on the optical connector whenever the fiber is not plugged in, and do not touch the ceramic ferrule tip.
Features
- Drone side of the link
- Analog camera video (CVBS) → light in the fiber, down to the ground
- Control commands from the fiber → flight controller (serial, CRSF / SBUS)
- One fiber carries both directions
- No video radio on the drone - nothing to jam
- FC optical connector with dust cap
- 4 corner mounting holes
Specifications
In the box
- 1 x air module (TX)
This product is not sold through the cart. We go over your setup with you on the phone first, to make sure it fits, and take the order in that call.




