GEPRC GEP-M1025-DQ GPS Module with Compass and Barometer -
A GEPRC GPS module from the GEP-M1025 series, built on a u-blox M10 chip with a 25x25mm ceramic antenna. The DQ version adds both a QMC5883L compass and a DPS310 barometer, so one module provides position, heading and altitude data. Because of a shortage at the maker, some units ship with a DPS368 barometer; GEPRC says there is no difference in performance or use. It tracks GPS, BDS, Galileo, QZSS and SBAS, up to 32 satellites, at 10Hz. A flash chip and a farad capacitor keep settings and allow a fast hot start. Wiring is 6 wires: 5V, GND, TX and RX to a flight controller UART, plus SCL and SDA to I2C for the compass and barometer. Tip: in INAV, set the QMC5883 compass orientation to CW 0° flip.
Features
- u-blox M10 chip (M10050)
- Built-in QMC5883L compass and DPS310 barometer
- GPS + BDS + Galileo + QZSS + SBAS, up to 32 satellites
- 25x25mm ceramic antenna
- 10Hz update rate, 1.5m horizontal accuracy
- Flash chip and farad capacitor for a fast hot start
- 3.3V-5V input, UART and I2C
Specifications
In the box
- GPS module
- Connection cable
- User manual
- GEPRC sticker
- Heat-shrink tube




