GEPRC GEP-M10-DQ GPS Module with Compass and Barometer - M10 chip, 22x22mm
A small GPS module from GEPRC's GEP-M10 series, built on the u-blox M10 (M10050) chip with a ceramic antenna. The DQ version is the one with both a QMC5883L compass and a DPS310 barometer, so a single 22x22mm, 8g module provides position, heading and altitude data. GEPRC notes that because of a shortage some units carry a DPS368 barometer instead of the DPS310, and the two versions ship at random. It receives GPS, BDS, Galileo, QZSS and SBAS, up to 32 satellites, at a 10Hz update rate and 115200 baud. A flash chip and a farad capacitor keep the settings and allow a fast hot start. It connects through a 6-pin connector: 5V, GND, TX and RX to a flight-controller UART, and SCL and SDA to I2C for the compass and barometer. Input voltage is 3.3V to 5V. It is smaller and lighter than the GEP-M1025-DQ also sold in the store (29x29mm, 13g), so it suits builds where space and weight matter.
Features
- u-blox M10 chip (M10050)
- Built-in QMC5883L compass and DPS310 barometer
- Small and light: 22x22x8.2mm, 8g
- GPS + BDS + Galileo + QZSS + SBAS, up to 32 satellites
- 10Hz update rate, 1.5m horizontal accuracy
- Flash chip and farad capacitor for a fast hot start
- 3.3V-5V input, UART and I2C on a 6-pin connector
Specifications
In the box
- GEP-M10-DQ GPS module
- Connection cable
- Heat shrink tubing
- GEPRC sticker
- Instruction sheet




