ReadyEdi 10000mAh 6S 22.2V 20C UAV Heavy-Lift LiPo Battery (XT90 Anti-Spark)
ReadyEdi 6S1P LiPo pack: 10000mAh at 22.2V nominal (25.2V fully charged), about 222Wh. It is meant for heavy-lift multirotors, large aerial-photography octocopters and payload platforms that need long flight time at moderate current draw. Rated 20C (200A) continuous with a 40C (400A) burst. ReadyEdi recommends drawing 20C for no more than 10 seconds at a time. Weight approx. 1285 g, size 59 × 65 × 170 mm. Aluminium side plates protect the cells from impact and improve cooling. ReadyEdi states ISO9001, MSDS and UN38.3 compliance. Discharge plug: XT90 Anti-Spark; balance lead: JST-XH. Charge on a balance charger in LiPo mode; ReadyEdi recommends 1–5C. For 12S systems, run two identical packs in series, at the same charge level and age. Ships by ground courier only (lithium battery).
Features
- 6S1P, 22.2V, 10000mAh (about 222Wh)
- 20C continuous, 40C burst
- XT90 Anti-Spark, JST-XH balance lead
- Aluminium side plates for protection and cooling
- For heavy-lift and large camera multirotors
- ISO9001, MSDS and UN38.3 per ReadyEdi




