ReadyEdi XT30 Voltage Output Adapter Board (XT30 to JST-GH 6-pin)
A small adapter board that carries a voltage output from an XT30 connector to a 6-pin JST-GH connector. It is meant for drone power systems and custom electronics, and is offered as an accessory for ReadyEdi's UBEC with an XT30 output. Pinout: pins 1–3 carry the voltage supplied through the XT30, pins 4–6 are ground. The board connector is SM06B-GHS-TB; the mating cable housing is GHR-06V-S. Note that this pinout is not the Cube/Pixhawk POWER-port standard (where pins 3 and 4 are current- and voltage-sense lines), so do not plug it into a flight controller POWER port. Check polarity and voltage with a multimeter before connecting it to equipment for the first time.
Features
- Adapts an XT30 voltage output to a JST-GH 6-pin connector
- Pins 1–3: V out; pins 4–6: GND
- Board connector SM06B-GHS-TB, cable housing GHR-06V-S
- Companion accessory for the ReadyEdi UBEC with XT30 output
- Not for Cube/Pixhawk POWER ports (different pinout)
Specifications
In the box
- 1 × XT30 Voltage Output Adapter Board




