Matek Micro BEC 12S (mBEC12S) - 6-60V to 5V/9V/12V Step-Down Regulator
A small Matek BEC for large drones and high voltages: it takes 6 to 60V, so batteries up to 12S, and delivers a clean, stable supply for parts such as a video transmitter, camera, receiver or GPS. The output is selected by bridging pads: 5V (default), 9V or 12V. Continuous current depends on the input and output voltage - for example, at 5V out: 2.8A from a 16V input, 2.3A from 24V and 1.8A from 50V - with peaks up to 3.5A for 2 seconds per minute. It has over-current protection, thermal shutdown and short-circuit tolerance. Note: there is no reverse-polarity protection, so check polarity before connecting. 18 x 15 mm, about 2 g, 2.54 mm solder pads.
Features
- 6-60V input - up to 12S batteries
- 5V, 9V or 12V output, selected by bridging a pad (5V default)
- Up to 2.8A continuous at 5V out (16V in), 3.5A peak
- Low output ripple: 20-30mV
- Over-current protection, thermal shutdown and short-circuit tolerance
- 18 x 15 mm, about 2 g
- 2.54 mm solder pads
- No reverse-polarity protection - check polarity
Specifications
In the box
- 1 x Micro BEC 12S module




