Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / Electronics / Aluminum electrolytic capacitor, rated 1000 µF / 35 V
Aluminum electrolytic capacitor, rated 1000 µF / 35 V
no brand

Aluminum electrolytic capacitor, rated 1000 µF / 35 V

₪10

An aluminum electrolytic capacitor rated 1000µF at 35V, with two radial leads. On FPV drones a capacitor like this is soldered across the ESC's battery input pads. It absorbs the voltage spikes and noise the motors create as they accelerate and brake. Those spikes can damage the ESC and the flight controller, and they show up as lines and noise in an analog camera feed. A 35V rating suits packs up to 6S (25.2V fully charged) and leaves a safety margin. On 8S (33.6V fully charged) the margin is too small, so use a 50V or higher part. Tips: watch the polarity. The stripe on the body marks the negative lead, and the longer lead is positive. Keep the leads as short as you can and solder the capacitor close to the pads. Secure it so it cannot vibrate, for example with heat-shrink or a zip tie to an arm.

Features

  • 1000µF, 35V rated
  • Aluminum electrolytic, radial leads
  • Filters voltage spikes and noise at the ESC input
  • Suits packs up to 6S
  • Polarized, negative lead marked with a stripe

Specifications

Capacitance1000µF
Rated voltage35V
TypeAluminum electrolytic
LeadsRadial, 2 leads
PolarityPolarized (negative lead marked)
Recommended useESC input filtering, up to 6S
How long will it fly? Open the flight time calculator →
1
SKUELC-0048
Brandno brand
CategoryElectronics
Stock5 units
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved