Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / Electronics / Axisflying Argus Pro 100A 8S ESC
Axisflying Argus Pro 100A 8S ESCOut of stock
Axisflying

Axisflying Argus Pro 100A 8S ESC

₪380

A 4-in-1 ESC from Axisflying's Argus Pro line for 4S to 8S, rated 100A continuous and 110A burst. Axisflying aim it at 13-15 inch long-range, cinematic and heavy-lift drones. This is the 8-bit version running Bluejay. It has no serial ESC telemetry and no current sensor; both are only on the 32-bit version. Bluejay itself supports bidirectional DShot, so you can still run RPM filtering in Betaflight. The board sits in a CNC aluminum housing that spreads heat and protects the components. It has over-current, over-temperature and over/under-voltage protection, and no BEC. It measures 57x56x7mm, weighs 41±2g and mounts on 30.5x30.5mm. The box holds an XT90 power cable, a flight-controller cable set, a capacitor, and M3 screws with damping grommets. Tips: solder the capacitor close to the input pads. There is no current sensor, so if you want mAh readings you need an external current meter.

Features

  • 100A continuous, 110A burst
  • 4S to 8S
  • Bluejay (8-bit) firmware with bidirectional DShot
  • No serial telemetry or current sensor on this version
  • CNC aluminum housing for heat dissipation
  • Over-current, over-temperature and over/under-voltage protection
  • 30.5x30.5mm mounting, XT90 cable included

Specifications

ModelArgus Pro 100A
Continuous current100A
Burst current110A
Input voltage4-8S LiPo
FirmwareBluejay (8-bit)
TelemetryNot supported on the 8-bit version
Current sensorNot on the 8-bit version (200A sensor on 32-bit only)
BECNot supported
ProtectionOver-current, over-temperature, over/under-voltage
HousingCNC aluminum
Size57 x 56 x 7mm
Weight41 ±2g
Mounting30.5 x 30.5mm
Application13-15 inch long range / cinematic / heavy lift

In the box

  • 1x Argus Pro 100A ESC
  • 1x XT90 power cable
  • 1x set of flight-controller cables (analog / HD / VTX / RX)
  • 1x capacitor
  • 4x M3 screws and damping grommets
How long will it fly? Open the flight time calculator →
1
SKUELC-0032
BrandAxisflying
CategoryElectronics
StockOut of stock
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved