Free shipping on orders over ₪600 · Stock in Israel · Bit, bank transfer or card by phone
Home / Electronics / Aocoda-RC F455S V3.2 Stack — F405 V3.2 FC + 55A 8BIT 4-in-1 ESC 30x30mm
Aocoda-RC F455S V3.2 Stack — F405 V3.2 FC + 55A 8BIT 4-in-1 ESC 30x30mmOut of stock

Aocoda-RC F455S V3.2 Stack — F405 V3.2 FC + 55A 8BIT 4-in-1 ESC 30x30mm

₪245

The Aocoda-RC F455S V3.2 stack pairs the F405 V3.2 flight controller with the 3055S 8-bit 4-in-1 ESC, both on 30.5 x 30.5mm mounting and rated for 3S to 6S. It suits full-size freestyle builds. The FC runs an STM32F405 (168MHz) with an ICM42688P gyro, SPL06-001 barometer, AT7456E analog OSD, 16MB blackbox and five UARTs, enough for a receiver, GPS and a digital video system. The BEC supplies 5V and 9V at 2.5A, and BLE lets you configure the board from a phone app without pressing a BOOT button. Firmware: Betaflight, INAV and ArduPilot, target AOCODARCF405V3. The ESC is rated 55A continuous and 65A peak per channel and ships with Bluejay, which supports bidirectional DShot for RPM filtering. It has no BEC. Solder the included 35V 1000uF capacitor across the battery pads.

Features

  • STM32F405 FC with ICM42688P gyro
  • 55A continuous / 65A peak per channel ESC
  • Bluejay firmware with bidirectional DShot
  • BLE for setup from a phone
  • 5V and 9V BEC, five UARTs
  • Betaflight, INAV and ArduPilot
  • 3S to 6S, 30.5 x 30.5mm mounting

Specifications

FC MCUSTM32F405RGT6, 168MHz, 1MB Flash
GyroICM42688P (SPI1)
BarometerSPL06-001 (I2C1)
OSDAT7456E (SPI2)
Blackbox16MB (SPI3)
Motor Output8ch
UARTs5 (1,2,3,4,5)
PWM Outputs10 (incl. LED strip pad)
I2C1
ADC3 (VBAT, RSSI, CURR)
SBUSbuilt-in inverter
USBType-C
Cameradual input with free switching
ReceiversELRS / CRSF / S.BUS / FrSky / Futaba / FlySky / TBS Crossfire / DSMX
BluetoothBLE — wireless configuration via app, no BOOT button needed
FC Input Voltage12.6-25.2V (3-6S LiPo)
FC BEC5V/2.5A, 9V/2.5A (max 2.7A)
FC Current Sensornot built in (reads ESC current via CURR pad)
FC Firmware TargetAOCODARCF405V3 (Betaflight / INAV / ArduPilot)
FC Dimensions37 x 37mm, M3 30.5 x 30.5mm, 9.4g
ESC Continuous Current55A x4
ESC Peak Current65A x4
ESC Input Voltage3-6S LiPo
ESC BECnone
ESC Temperature Sensornone
ESC ProtocolsDShot150/300/600, MultiShot, OneShot
ESC FirmwareBluejay D_X_30_v0.21.1-RC1
ESC Dimensions44.5 x 40.5mm, M3 30.5 x 30.5mm, 15.8g
In the Box1x F405 V3.2 FC, 1x 3055S 8BIT 4in1 ESC, 1x 8Pin SH1.0 harness, 8x M3*8 shock ball, 8x nut, 4x M3*30 screw, 1x 35V 1000uF capacitor, 1x XT60 lead

In the box

  • 1x F405 V3.2 FC
  • 1x 3055S 55A 4-in-1 ESC
  • 1x 8-pin SH1.0 harness
  • 8x M3x8 damping ball and 8x nut
  • 4x M3x30 screw
  • 1x 35V 1000uF capacitor
  • 1x XT60 power lead
How long will it fly? Open the flight time calculator →
1
SKUELC-0002
BrandAocoda-RC
CategoryElectronics
StockOut of stock
FFPV.BASE

An Israeli shop for FPV drone parts and ready-to-fly quads. Build, fly, upgrade — all in one place.

Israeli FPV storeLicensed dealer no. 060875804Licensed by the Israeli Ministry of Communications to trade in wireless equipment
Categories
Customer service
Contact
© 2026 FPV.BASE — All rights reserved