4-in-1 Hex Screwdriver Set, 1.5 / 2.0 / 2.5 / 3.0 mm
A cross-shaped hex driver with four sizes, 1.5, 2.0, 2.5 and 3.0 mm, on a 6.35 mm quick-change mount. These are the sizes that come up in almost every FPV build: frame screws, motor screws and stack screws. It also suits 1/8 and 1/10 scale RC cars. TIGHTEN and LOOSEN arrows are marked on the body, so you can see at a glance which way to turn. Choosing a size: socket-head screws usually take 1.5 mm for M2, 2.0 mm for M2.5, 2.5 mm for M3 and 3.0 mm for M4. Button-head screws usually take one size smaller, for example 2.0 mm for an M3. Seat the bit fully in the screw head before turning so the head does not strip. On motor screws, check that the screw is not long enough to reach the windings.
Features
- Four hex sizes: 1.5, 2.0, 2.5 and 3.0 mm
- One cross-shaped tool instead of four separate drivers
- TIGHTEN and LOOSEN arrows marked on the body
- 6.35 mm quick-change mount
- Covers M2 to M4 frame, motor and stack screws
- Also suits 1/8 and 1/10 scale RC cars




